The recognized leader in the design and manufacture of high heat resistant, light weight, aircraft quality 6-6 Nylon fastener systems for competition, street, off-road, RV, and marine applications.
All clamps are precision molded from 6-6 DuPont Zytel aircraft quality nylon. Because of this, these products are unconditionally guaranteed that under normal usage, NOTHING will affect the performance of the products. |
|
These clamps offer:
-
Economical, lightweight alternatives to expensive aluminum and other metal products
-
Unaffected by any automotive fluids - including brake fluis, fuel, coolant, or solvents
-
Will not fade, melt, stain, corrode, or discolor under normal conditions
-
Will not crack or break due to heat or cold
-
Non-conductive
-
Separate, organize, and support all types of hose, tubing, and wire
|
|
Spark Plug Wire Separators
Fuel Lines & Fuel Injection
Oil Lines / Remote Filter Lines
Transmission Lines
Support Brake Lines
Support brake cables
Spark Plug Wire Separators
Fuel Lines & Fuel Injection
Oil Lines / Remote Filter Lines
|
|
The following information results from information in which test pieces of GRILON [Nylon 6] ;
1mm thick were exposed to the chemical tested for a period of 12 months at ambient temperature.
No, or negligible, changes in mass and dimension were noted. GP Nucleated / A28GM.
Properties:
Melting Point..............................................................................432°
Water Absorption......................24 Hr. Immersion 73° F / 23° C = -9
Flammability.................UL94 / thickness Rating....v-2 / .031 79
Heat Deflection....At 66psi Test Method ... ASTM D648 / °F = 363
Max.Usage Temp. .....Test Method ... EMS: 302° (In Air-Long Term)
Tensile Strength.......................................ASTM-D638-10 psi (Mpa)
Electrical Comparative Tracking ................ASTM D3638: 600+ volts
Volume Resistivity ....................................DIN 54382 / ohm-cm = 1
|
